How to Display Ceramic Wall Hangings and Ornaments

Quick answer

Display ceramic wall hangings by choosing a stable hook rated for the weight, using the included cord or a clear adhesive hanger, and placing them away from high-traffic areas to avoid bumps.

Step-by-step display guide

1. Choose the right hanging hardware: Use a small nail, picture hook, or adhesive hook rated for at least 2–3 pounds. Ceramic pieces are heavier than they look. A standard pushpin may not hold securely. Test the hook by giving it a gentle tug before hanging the ornament.
2. Attach the cord or hanger properly: If your ornament has a leather cord, loop it through the hanging hole and knot it securely. Avoid tying the knot too close to the ceramic edge, as repeated pressure can chip the glaze. Check the knot monthly for signs of fraying or loosening.
3. Position the ornament at eye level: Hang the piece so the center is roughly 57–60 inches from the floor. This makes it easy to appreciate the hand-painted details without craning your neck. Use a measuring tape or mark the wall with a pencil before hammering.
4. Avoid direct sunlight and moisture: Place the ornament on an interior wall away from windows, bathrooms, or kitchens. Prolonged sun exposure can fade underglaze colors, and humidity can damage the porcelain over time. If you must hang near a window, use UV-filtering glass or a sheer curtain.
5. Dust gently without removing: Use a soft, dry microfiber cloth or a makeup brush to dust the surface. Do not spray cleaner directly on the ceramic; moisture can seep into the cord or unglazed carving. For deeper cleaning, remove the ornament and wipe with a barely damp cloth, then dry immediately.

Product spotlight

• Ceramic Folk Black and Red Bird II Ornament Wall Hanging: Comes with a thin leather cord and can be used as a wall charm or ornament. The leather cord is ready to hang, but its thinness means you should avoid rubbing it against rough edges or hanging it where it might snag.